FSP Adopts ATX 3.0 “12V-2×6” Normal Throughout Whole 2023 PSU Lineup, PCIe 6.0 & Subsequent-Gen GPU Prepared

FSP has introduced that it is going to be updating its complete 2023 PSU lineup to the most recent 12V-2×6 energy connectors that are a part of the ATX 3.0 commonplace.

FSP To Improve Its Whole 2023 PSU Fleet With 12V-2×6 Energy Connectors, ATX 3.0 & PCIe 6.0 Compliant

A number of months in the past, it was reported that PCI-SIG was engaged on a brand-new ATX 3.0 connector to interchange the 12VHPWR plug. This new connector was generally known as the 12V-2×6 and featured some key refinements to the prevailing 12VHPWR 16-pin connector, making it safer and simpler to make use of. Now, FSP has confirmed that it is going to be adopting the most recent requirements in its ATX 3.0 lineup which will probably be out on retail cabinets this yr.

This yr at Computex 2023, we noticed a variety of merchandise from FSP which embrace small kind issue and goliath PSUs with as much as 2500W energy ranking and twin 12VHPWR connectors. These have been early models so it’s anticipated that we’ll now see them geared up with the most recent 12V-2×6 connectors. The press convention (by way of QuasarZone) highlighted the Hydrp G PRO sequence, Hydro PTM sequence, and the SFF Dagger PRO sequence as the primary to make the most of the brand new ATX 3.0 12V-2×6 connectors,

The remainder of the merchandise can also obtain the up to date connectors however to completely conform with the brand new commonplace, it’s talked about {that a} firmware replace will probably be required for the graphics card or the PSU. Anticipate FSP to supply a various vary of merchandise starting from Gold to Titantium rated designs to fulfill the ability necessities of each client.

NVIDIA is already utilizing the 12V-2×6 energy connectors on a majority of its GeForce RTX 40 GPUs such because the RTX 4070 Ti, RTX 4070, and RTX 4060. Among the newly produced RTX 4090 and RTX 4080 are additionally geared up with this new connector which replaces the 12VHPWR plug and makes for a really protected GPU to work with in comparison with the older design which might result in melting & burns if the connector wasn’t correctly plugged in.

We are able to count on extra producers to usher in their ATX 3.0 “12V-2×6” PSUs this yr. AMD can be open to utilizing the 12VHPWR/12V-2×6 connectors on its GPU lineup however needs to make sure that it’s protected for customers first.

Information Supply: Harukaze5719